Office steel frame mobile multi-functional soundproof telephone booth

Description

For stakeholders prioritizing operational readiness, cost-effective deployment, and superior environmental quality, this product delivers compelling advantages through its meticulously engineered features. The product's design philosophy is fundamentally aligned with the core imperatives of modern organizational management: maximizing asset utility, controlling lifecycle costs, and fostering human capital performance. It translates advanced engineering into tangible, bottom-line and well-being benefits across the entire spectrum of stakeholder concerns, from facilities managers and financial officers to end-users. This is achieved not through compromise, but by ensuring each technical specification directly serves a clear, high-priority operational or experiential goal. The result is a solution that functions as a strategic asset rather than a simple capital expense, integrating seamlessly into workflows while proactively addressing the challenges of noise, space utilization, and employee wellness.

                  

The foremost benefit is radical time savings: the modular design, with its intuitive six-component system, reduces on-site labor to a mere 45 minutes, minimizing disruption and accelerating return on investment. In operational terms, time is a direct cost. Traditional construction or complex assembly of acoustic rooms can consume days or weeks, involving multiple trades, scheduling conflicts, dust, and significant operational downtime for the surrounding area. This product eliminates that paradigm. The intuitive six-component system is pre-engineered for rapid field assembly. Each major module (roof, floor, walls, door) arrives as a complete, pre-finished assembly. The installation process is reduced to a logical, almost mechanical sequence of joining these large parts, requiring only basic tools and a small crew. This reduces on-site labor to a mere 45 minutes, a figure that brings profound implications. Minimizing disruption means a focused workspace can be deployed between shifts, overnight, or during a lunch break, with near-zero impact on adjacent operations. For organizations with multiple sites or evolving space needs, this deployability is a game-changer. Financially, the drastic cut in skilled labor hours and project management overhead accelerates return on investment from the moment of installation, as the unit becomes productive immediately without lingering indirect costs.

                   

The benefit derived from the 6063-T5 aluminum and cold-rolled steel construction, finished with premium electrostatic powder coating, is unparalleled durability and minimal long-term maintenance, ensuring the unit withstands rigorous use while retaining its professional appearance. The structural choice is an investment in longevity and lower total cost of ownership. The 6063-T5 aluminum alloy provides a rigid, corrosion-resistant skeleton that will not warp, rust, or degrade, ensuring the unit's structural geometry—and therefore its critical acoustic seals—remain intact for years. The cold-rolled steel adds robust armor at stress points, making the unit highly resistant to dents and impacts from daily use or relocation. The premium electrostatic powder coating is the final, crucial layer. More durable than any liquid paint, this fused polymer finish is highly resistant to scratches, scuffs, chemicals, and UV fading. The combined benefit is unparalleled durability: the product is built to endure high-traffic, multi-shift use in corporate, educational, or healthcare settings without showing wear. This directly translates to minimal long-term maintenance—no need for repainting, panel replacement, or structural repairs. It ensures the unit withstands rigorous use while retaining its professional appearance decade after decade, protecting the organization's aesthetic standards and capital investment.

              

The most significant user-experience benefit stems from the advanced acoustic insulation system. By integrating an E1 grade sound-absorbing interior panel, cavity-fill materials, a damping steel exterior, and complete EVA perimeter sealing, the product directly benefits occupants by creating a serene, focused environment that is up to 28 decibels quieter, effectively external noise pollution. For the end-user, the primary value is cognitive liberation. The advanced acoustic insulation system is a multi-pronged defense. The E1 grade sound-absorbing interior panel soaks up sound inside the cabin, preventing the hollow, reverberant feeling of a small space and ensuring conversations or focused thought remain clear. The cavity-fill materials (like specialized cotton/felt) provide massive broadband absorption, turning sound energy into negligible heat. The damping steel exterior acts as a massive, impervious barrier, reflecting incoming noise. The complete EVA perimeter sealing is the masterstroke, creating an airtight gasket that blocks sound's last pathway: the seams. The cumulative benefit is the creation of a serene, focused environment. A 28 decibel reduction is not a minor change; it is transformative. It can lower the din of a busy open office (approx. 70 dB) to a level of a quiet library (approx. 42 dB). This effectively externalizes noise pollution, allowing the user to control their auditory environment. The direct outcomes are improved concentration, reduced stress, higher quality work, and the ability to conduct confidential conversations—a direct contributor to productivity and professional satisfaction.

                

A further benefit is health and safety assurance, as all sound-dampening materials are non-toxic, flame-retardant, and corrosion-resistant. Creating a quiet space should not introduce new risks. The materials specified provide inherent health and safety assurance. Non-toxic, zero-VOC composition guarantees superior indoor air quality, preventing headaches or respiratory issues and supporting occupant health in a sealed environment. Flame-retardant properties, meeting recognized standards, provide critical passive fire safety, containing potential ignition sources and increasing safe egress time. Corrosion-resistant materials ensure long-term stability; they will not degrade into dust or off-gas over time, maintaining their protective and acoustic properties safely. This holistic material integrity means the sanctuary is also a safeguard.

                 

The benefit of the 8mm 3C-certified tempered glass is twofold: enhanced physical safety and additional soundproofing. The glazing is a dual-performance element. Its 8mm thickness and 3C-certification (a mandatory safety standard) ensure enhanced physical safety. In the extremely unlikely event of breakage, the glass fragments into small, blunt granules, eliminating the risk of serious laceration. This is a non-negotiable safety requirement for an occupied enclosure. Simultaneously, the substantial mass and stiffness of this thick glass provide additional soundproofing, contributing to the overall high acoustic performance of the wall assembly where it is installed.

               

The intelligent ventilation system provides the tangible benefit of continuous fresh air supply without the common drawbacks of drafts or significant heat loss, maintaining a stable, comfortable temperature that varies by less than 2°C from the exterior—promoting well-being and concentration. Stale, stuffy, or overly warm air destroys comfort and focus. The intelligent ventilation system, with its balanced dual fans, solves this. It provides a continuous fresh air supply to replenish oxygen and remove CO2, preventing drowsiness. It does so without the common drawbacks of drafts (as air movement is gentle and diffuse) or significant heat loss/gain. By maintaining near-neutral pressure and managing airflow, it maintains a stable, comfortable temperature that varies by less than 2°C from the exterior. This avoids the "greenhouse effect" and thermal discomfort, which are major complaints in poorly designed pods. This stable, fresh microenvironment is essential for promoting well-being and sustaining concentration over extended periods of use.

             

Finally, the lighting system offers the benefit of visual ergonomics; the 4500K natural light LEDs reduce eye fatigue and support alertness, with the added benefit of automated, energy-saving operation. Poor lighting is a silent drain on performance. The lighting system is ergonomically calibrated. The 4500K natural light LEDs emit a spectrum that minimizes harsh blue light, significantly helping to reduce eye fatigue associated with prolonged screen use. This balanced light also supports natural circadian rhythms, helping to maintain alertness. The added benefit of automated operation (via motion sensor) ensures energy is not wasted while providing immediate illumination upon entry, enhancing both convenience and efficiency.

                

Each feature is thus directly linked to a clear, measurable benefit in efficiency, comfort, safety, and cost of ownership. In conclusion, the product's architecture is a model of purpose-driven design. There is no superfluous engineering. The modularity links to efficiency and speed. The materials and acoustics link to comfort and performance. The safety specs and healthy materials link to safety and wellness. The durability and low maintenance link directly to a favorable cost of ownership. Every technical decision is traceable to a stakeholder benefit, making it a rational, high-value solution for demanding environments.

Specifications

Applications

Advantages

FAQ